The laser projection shows your employees the path of the strands and also additional information such as cable ties on the assembly board.

✓  The laser shows all strands simultaneously on the assembly board, if a strand has been connected correctly, the laser colors this path differently than the unconnected ones.

✓ Divide the strands into individual steps: The laser shows the path of the first strand. If this strand is laid correctly, the laser colors this path a different color and shows the path of the second strand. If the second strand is also laid correctly, the path of the first strand can be removed and the laser indicates the third strand, etc.

The brightness of the laser can be adjusted as required. Even a light intensity of 40% of the total intensity is clearly visible.

The laser is clearly visible on black, shiny strands and material of the same color (green laser on green strand).

The laser projection is flicker-free and can be seen clearly on different surfaces.

Projection system

We supply projection systems as attachments to match the cable porter.

We mount MediaLas ILP722 projectors with installed modules for red and green on the projection traverse. These projectors provide highly visible installation lines, even with bright lighting on the assembly board. Not only on the smooth surface but also on already installed cables. This means that Kabelassistent can give your employees clear instructions for Install-By-Light and Connect-By-Light.

Because the projection traverse is firmly screwed to the table frame of the Kabelporter, the scale remains constant when the employees change the working height of the assembly boards. Even when moving the Kabelporter, the projector always remains correctly aligned with the assembly board.

If the projection system is too high for the ceiling height or lighting strips in your production rooms, we offer a variant with projection via a mirror. We install special surface mirrors to prevent disturbing double images. The reflective surface is hard and therefore scratch-resistant. They are easy to clean. The back of the mirror is covered with a splinter protection film.

We equip projection systems from 12 feet with two projectors and two mirrors if the installation height must remain limited. The two projectors share the projection surface on the assembly board.